Production

Sundware solar collectors are manufactured in safe and secure environment, ISO certified factories, accompanied with latest technology robotic equipments and semi-automatic machines from cutting, bending, welding and fixing. Within the last 35 years, it’s proud to say that the manufacturer’s products are installed worldwide in 5 continents and more than 50 countries.

Sundware thermal collectors are SRCC OG-100 approved for the North- American market, in addition to Solar-key mark certificate for the European markets.

Contact Us

Automatic Cutting Line

Full stand to hold the absorber and aluminum rolls, comes with Semi-Automatic cutting line used for the copper and aluminum sheet, the used sheets can be up to 1250mm in width and up to 6000mm in length, these cutted sheets are mainly used for the solar hot water and solar air collectors to absorb the solar radiation and transfer it to heat the water in tubes ( solar hot water) or to heat the air in the channels. ( solar air)

Ultrasonic Welding

Robotic ULTRASONIC welding machine, to weld the copper pipes on the copper absorber in very efficient way and 100% accuracy. This is used for manufacturing the copper surface absorbers in fins and full plate surface which are both used for solar hot water collectors in case the requirement is copper absorber.

Laser Welding

Automatic LASER welding machine to weld the copper pipes on the aluminum absorber in very efficient way and 100% accuracy. This is used for the manufacturing of the aluminum surface absorbers in fins and full plate, which are both used for solar hot water collectors in case the requirement is aluminum absorber.

Aluminum Fins

Aluminium Fin and copper pipe welded with LASER technology. Highly absorptive surface, with blue selective PVD coating and simultaneously low cost with length up to 6000mm. They are assembled and measured manualy to double check if there is any discrepancy.

Copper Headers Production

Production of 22mm copper headers applied for the solar hot water collectors. The headers are well holed 8mm to be welded with the risers. No. Of risers differ based on the solar collector model which are ranged from 1.5m2 to 2.9m2 ( 9 models vertically and other 9 models horizontally).

Recycling

Pure copper flakes ready to be fully recycled for the production of new material. They are well gathered , asembled in specific barrels for recycling , and re-used in production if possible, or phased out for resale for other production processes.

© 2017 Sundware Technologies. All Rights Reserved